Sony HVR-Z7J Service Manual page 288

3-23. GL (T) Block Ass'y, GL Arm (S) Ass'y
1. Removal
1) Remove the GL (T) block ass'y 1 from the GL (T) shaft.
2) Remove the GL (S) block ass'y 2 from the GL arm (S) shaft.
GL (T) shaft
2 GL arm ass'y (S)
GL arm (S) shaft
HVR-Z7J/Z7U/Z7N/Z7E/Z7P/Z7C
1 GL (T) block ass'y
GL arm (T) shaft
6-104
2. Attachment procedure
1) Enter the [ULE] mode.
2) Installing the GL arm (S) ass'y
Install the GL arm (S) ass'y 2 to the GL arm (S) shaft, while
aligning the second gear of the GL rack with the phase align-
ment mark.
3) Installing the GL (T) block ass'y
Install the GL (T) block ass'y 1 to the GL (T) shaf, tin the
way that the GL (T) arm plate of the GL (T) block ass'y 1 is
placed parallel to the chassis.
Key Points
in Re-assembling
GL (T) arm plate
is placed parallel
to the chassis.
Key Points
in Re-assembling
GL rack
GL (T) arm plate
Alignment mark