Checklist; Pt-7502-2 System Board Specifications - Intel VX PENTIUM PCI User Manual

1.3

Checklist

Please check your PT-7502-2 package to ensure that it contains the following items :
• PT-7502-2 Main Board
• PT-7502-2 User Manual
• Jumper Setting List
•
Cable Pack included
1 x 40 way flat cables
1 x FDC flat cable
1 x DB9 flat cable and one DB25 flat cable with a bracket (COM 1 & COM 2)
1 x DB25 flat cable with a bracket (Printer port)
• Cache Module (either 512KB , 256KB or not bundle)
If any of these items are missing or damaged, please contact your local dealer or sales
representative for assistance.
1.4

PT-7502-2 System Board Specifications

• Intel i430VX PCIset
• Support either 75/90/100/120/133/166/180/200 MHz PENTIUM
ZIF socket
• Support Pentium P55C
• Support Dual Voltage Regulator Module
• Support Cyrix 6x86, AMD K5 CPUs
• Uses 72-pin SIMM modules x 4 auto banking in multiple configuration up to 128MB
• Support Both Fast Page Mode and Extended DATA Output (EDO) DRAM module
• Support SDRAM/EDO DRAM/Page Mode DRAM use 168-pin DIMMx2
• Support cache module socket, cache module options 256KB or 512KB pipeline burst
SRAM module
• 4 PCI Local Bus slots, and 3 x 16 bits ISA Bus slots
• All 4 PCI slots support Master mode
• System BIOS support 4 IDE harddisk drivers that don't need device driver for S/W
application, the capacity each harddisk can large than 528MB up to 8.4GB
• PCI Bus master IDE interface on board with two connectors support 4 IDE devices in 2
channel, the PCI IDE Controller supports PIO mode 0 to Mode 4 at maximum transfer
rate of 16.67 MB/s and Bus master IDE DMA Mode 2.
• On board super Multi-I/O chip that support 2 serial port with 16550 Fast UART
compatible, 1 parallel port with SPP, EPP and ECP capabilities, and a floppy disk drive
interface.
• Support PS/2
TM
connector.
• Support the Universal Serial Bus (U.S.B.) (option)
• System BIOS supports NCR810 SCSI BIOS firmware and Green feature function, Plug
and Play Flash ROM
TM
chipset
Introduction
TM
CPUs with 321 pin
Page 2