Playing Back Video Cds; Selecting Video Output (Pal, Pal Auto, Ntsc); Loading Discs; Playing A Video Cd - JVC CA-MXSK1 Instructions Manual

Playing Back Video CDs

Selecting Video Output (PAL, PAL AUTO, NTSC)

You can set this setting in Standby mode.
Before playing a VCD, use the buttons on the unit to select a
video output mode to match your TV system.
Video output is preset for PAL.
Relationship among the playable CDs, System's TV
output mode and your TV's color system:
Playable CD Player's TV output mode Your TV's color system
NTSC/PAL NTSC
NTSC/PAL PAL
NTSC/PAL PAL AUTO
1
1
Turn off the power to put the System into
Standby mode.
2
Press and hold the 7 button on the Unit for
more than 2 seconds.
The current TV output mode ("NTSC" for example)
appears on the display for five seconds.
3
Within five seconds, press the TUNING
+/¡ or TUNING 1/– button on the Unit
to select the System's TV output mode.
Each time you press the button, the TV output mode
changes as follows:
NTSC PAL
NTSC: for NTSC exclusive TV
PAL: for PAL exclusive TV
PAL AUTO: for multisystem TV
4
Press 7 button to confirm selected TV output
mode.

Loading Discs

1
Press CD Open/Close 0.
The unit automatically turns on and the disc tray comes out.
2
Place a disc correctly within the circle of the
disc tray, with its label side up.
Label side up
• When using a CD single (8 cm), place it within the inner
circle of the disc tray.
NTSC
PAL
Multisystem
2
PAL AUTO (back to beginning)
3
Press DISC SKIP and place the next CD.
When you press the button, the tray turns for the next CD.
4
Repeat steps 3 for the last CD.
5
Press CD Open/Close 0.
The tray is closed.
When you place a CD onto the currently selected tray,
whose disc number shown on the CD indicator, reading of
the CD starts. After the reading is completed, the total
number of tracks and total playing time will appear, then
the playing time of the first track.
\
READING NOW
3
*VIDEO CD or AUDIO CD
If the video CD has the Playback Control function, "VCD
PBC" will appear when you press 7 followed by PBC and
DISC 3¥8.
To put an 8 cm CD onto a tray, insert it so that it is aligned
with the groove in the trays center.
If a tray is opened when the System switches to the standby
mode, the tray will close automatically.

Playing a Video CD

You can play video CDs either with or without the PBC
function.
1
Turn on the TV and select the video input so
that you can view the pictures from the CD
player.
Refer to the manual supplied for your TV.
2
Prepare a CD.
Refer to "Loading Discs" on this page.
3
Start playback of the CD.
Press DISC 3¥8, to start playback of the currently
selected CD, or press DISC 1-3, to select the disc and
start playing.
Compu Play
When DISC 3¥8, or DISC 1-3, is pressed while the system
is on standby, the power is automatically turned on.
To stop during play, press 7.
To stop playing and remove the disc, press 7 and then 0
for the disc being played.
– 17 –
\
*
VIDEO CD
«
Total number of tracks
Playing time of the
and playing time
1st track