Self-Diagnostics Check List - Samsung RS265 LAWP Service Manual

4. ALIGNMENT AND ADJUSTMENTS

Self-diagnostics check list

NO Error
ICE MAKER SENSOR
REFRIGERATOR SENSOR
REFRIGERATOR DEFROST SENSOR
REFRIGERATOR FAN ERROR
ICE MAKER function error
CoolSelect Zone SENSOR
TM
REFRIGERATOR DEFROST ERROR
EXIT-SENSOR
FREEZER SENSOR
FREEZER DEFROST ERROR
FREEZER FAN ERROR
CONDENSER FAN ERROR
FREEZER DEFROST ERROR
Error items of self-diagnostics
NO Error items
ICE MAKER
01
SENSOR
REFRIGERATOR
02
SENSOR
REFRIGERATOR
03
DEFROST SENSOR
REFRIGERATOR
04
FAN ERROR
ICE MAKER function
05
ERROR
CoolSelect
06
Zone TM sensor
REFRIGERATOR
07
DEFROST ERROR
Ambient Air
08
SENSOR
FREEZER
09
SENSOR
FREEZER
10
DEFROST SENSOR
FREEZER FAN
11
ERROR
CONDENSER FAN
12
ERROR
(COMP-FAN)
FREEZER
13
DEFROST ERROR
LED Display
Ice Maker sensor connector missing; contact
failure, electric wire cut, short-circuit; Ice Maker
sensor failure; and so on
Refrigerator sensor connector missing; contact
failure, electric wire cut, short- circuit; Refrigerator
sensor itself failure; and so on
Refrigerator evaporator internal defrosting sensor
connector missing; contact failure, electric wire cut,
short-circuit; sensor itself failure; and so on
Refrigerator Fan motor operation failure;
feedback signal line contact failed, electric wire
cut, short- circuit; and so on
Ice-ejector and level failed three times or more
CoolSelect Zone
failed, electric wire cut, short-circuit; CoolSelect Zone
sensor itself failed; and so on.
In the refrigerator room, if frost removal mode is
finished due to limited time of 80 minutes. Error
is displayed.
Air sensor connector missing; contact failure,
electric wire cut, short-circuit; open air sensor
itself failure; and so on
Freezer sensor connector missing; contact
failed, electric wire cut, short-circuit;Freezer
Room sensor itself failure.
Freezer evaporator defrosting sensor connector
missing; contact failed, electric wire cut, short-
circuit; sensor itself failure; and so on
Freezer Fan motor operation failure; feedback
signal line contact failure, motor's electric wire
missing; and so on.
Condenser Fan motor operation failure; feedback
signal line contact failure, motor's electric wire
missing; and so on.
In the freezer room, if frost removal mode is
finished due to limited time of 70 minutes. Error is
displayed
If any LEDs blink, the corresponding sensors and
components must be checked for an error.
Details
TM
sensor connector missing; contact
TM
30
Remarks
Indicate Error when the temperature sensed by Ice
Maker sensor is higher than 150
Indicate Error when the temperature sensed by
Refrigerator sensor is higher than 150 or lower than –58 .
Indicate Error when the temperature sensed by Refrigerator
defrosting sensor is higher than 150 or lower than –58 .
Indicate Error if the F and G signals generated by the FAN-
motor operation are not input.
Indicate Error when the temperature sensed by
CoolSelect Zone TM sensor is higher than 150
or lower than –58 .
-
Indicate Error when the temperature sensed by the open air
sensor is higher than 150 or lower than
–58 .
Indicate Error when the temperature sensed by Freezer
sensor is higher than 150 or lower than –58 .
Indicate Error when the temperature sensed by Freezer
defrosting sensor is higher than 150 or lower than
–58 .
Indicate Error if the F and G signals generated by the FAN-
motor operation are not input.
Indicate Error if the F and G signals generated by the FAN-
motor operation are not input
-
or lower than –58 .