HP ProLiant ML370 Generation 5 User Manual page 47

WARNING:
Remove watches, rings, or other metal objects.
•
• Use tools with insulated handles.
Do not place tools or metal parts on top of batteries.
•
Removing and installing a memory board
Power down the server (on page 20).
1.
Do one of the following:
2.
Open or remove the tower bezel, as needed
o
Extend the server from the rack (on page 22).
o
Remove the access panel (on page 25).
3.
Remove the processor air baffle (on page 26).
4.
Remove the memory board and place it on a flat surface.
5.
Do one of the following:
6.
Remove a FBDIMM.
o
Install a FBDIMM
o
Align the memory board with the memory slot and the memory board guide clips.
7.
To prevent personal injury from hazardous energy:
("Installing FBDIMMs" on page 49).
("Open or remove the tower
Hardware options installation 47
bezel" on page 21).