Pt Programming - Panasonic KX-NS1000 Manual

5.5.3 PT Programming

Description
A PT user can perform the following programming:
a.
Personal Programming: Customising the extension according to his needs.
b.
Manager Programming: Customising specified frequently changing items (e.g., Charge Management and
Remote Extension Dial Lock).
Conditions
•
COS programming determines whether personal programming can be performed.
•
The extension(s) assigned as the manager COS can perform manager programming.
•
During programming, the PT is considered to be busy.
•
Only one manager programmer is allowed to perform manager programming at one time. The maximum
number of simultaneous programmers that each PBX supports is as follows:
–
one manager programmer + 63 personal programmers
–
64 personal programmers
•
Personal Programming Data Default Set
A user can return the items programmed on the telephone to default.
PC Programming Manual References
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—Manager—
Mode
19.1 PBX Configuration—[11-1] Maintenance—Main—Password—
Programming—Prog *1
Feature Guide References
5.1.1 Class of Service (COS)
5.1.6 Manager Features
6.1 Capacity of System Resources
User Manual References
1.9.14 Clearing Features Set at Your Extension (Extension Feature Clear)
3.1 Customising Your Phone (Personal Programming)
4.1 Manager Programming
5.5.3 PT Programming
PT Programming
Manager Password - PT
Feature Guide 493