Pioneer VSX-39TX Service Manual page 112

VSX-39TX, VSX-37TX, VSX-36TX, VSX-D909S
Display
All the display information is explained and /or referenced here.
1
SIGNAL
SELECT OVER
ANALOG SP
DIGITAL
AC-3RF
AUTO
AC-3 DTS MPEG
L
LS
1 SIGNAL SELECT indicators
Light to indicate the input signal you selected.
ANALOG : Lights when analog signals are assigned.
DIGITAL : Lights when digital audio signals are selected.
AC-3 RF : Lights when AC-3 RF signals are assigned.
AUTO : Lights when the receiver is set to select the input
signal automatically.
2 Program Format indicators
AC-3 : Lights when a source with Dolby Digital signals is
played.
DTS : Lights when a source with DTS audio signals is
played.
For Dolby Digital or DTS sources : These indicators
change according to which channels are active in the
source. When all three LS (left surround), S (surround)
and RS (right surround) light at the same time it means
a source with Surround EX or DTS-ES flag is being
used.
L – Left front channel.
C – Center channel.
R – Right front channel.
LS – Left surround channel.
S – Surround channel (mono).
RS – Right surround channel.
LFE – Low Frequency Effects channel.
3 Analog level indicators
OVER – When the source signal is analog, this lights if
the signal is in danger of distorting. Press INPUT ATT
on the front panel to lower the signal level.
ATT – Lights when INPUT ATT is used to reduce the
level of the analog source signal.
4 Speaker indicators
Light to indicate the current speaker system, A and/or
B.
5 LOUDNESS indicator
Lights when the LOUDNESS mode is on.
6 H.P (headphones)
Lights when headphones are connected to the
PHONES jack (speakers systems A and B both turn off
automatically).
112
2 3 4 5 6 7 8
ATT LOUDNESS MIDNIGHT
H.P
AB
MONO STEREO
TUNED AMFM
C LFE
R
S RS
15
11
9 10
DSP STEREO
PRO LOGIC
DIGITAL
14
7 MIDNIGHT indicator
Lights when the MIDNIGHT LISTENING mode is on.
8 DSP indicator
Light when a DSP or Advanced Theater modes are
selected.
9 STEREO indicator
Lights when a STEREO modes are selected.
10 Radio Frequency/Function indicator
Displays the function or the frequency of the current
radio station.
11 / dts mode indicators
DIGITAL : When the
this indicator lights to indicate playback of a Dolby Digital
signal. However,
playback of Dolby Digital.
PRO LOGIC : When the
on, this indicator lights during 2 channel playback.
DTS : When the
indicator lights to indicate playback of a DTS signal.
THX: Lights when the HOME THX CINEMA mode is
selected.
12 MASTER VOLUME indication
Displays current volume level.
13 TAPE 2 indicator
Lights when the TAPE 2 monitor is on.
14 Character display
Shows current mode, status, etc.
15 TUNER indicators
MONO : Lights when the tuner is set to receive FM
broadcasts and when selected MPX mode.
STEREO : Lights when a FM stereo broadcast is
received in the auto stereo mode.
TUNED : Lights when a broadcast is received.
AM/FM : Light to indicate the current band (FM or AM).
12
13
VOLUME
dB
MPEG TAPE 2
/dts mode on the receiver is on,
PRO LOGIC lights during 2 channel
/dts mode on the receiver is
/dts mode on the receiver is on, this