Pioneer VSX-39TX Service Manual page 111

DIGITAL NR button
Switches the DIGITAL NR on or off (cannot be used in
THX or MULTI CH IN modes).
SIGNAL SELECT button
Use to select the type of signal being input into the
receiver. Press SIGNAL SELECT repeatedly to select
one of the following:
ANALOG – To select an analog signal.
DIGITAL – To select a optical or coaxial digital signal.
AC-3 RF – To select an
AUTO – This is the default. If there are analog, digital
and RF signals input, the receiver automatically
selects the RF signal. If there are analog and digital
signals input the digital will be selected.
FL DIMMER button
Use to adjust the brightness of the main display.
6 Display
7 Remote sensor
Point the remote control toward the remote sensor to
operate the receiver .
8 MULTI-ROOM & SOURCE button
Press to use the multi room feature (requires an optional
PIONEER Multi-Room Remote Sensor Unit MR-100 or
another IR receiver).
CONTROL button : Used together with the INPUT
SELECTOR to select the function or use with the
MASTER VOLUME to select the volume of the MULTI
ROOM system.
9 INPUT SELECTOR dial
Turn to select a source component. (You can also use to
select a function in the MULTI-ROOM & SOURCE
mode). The source indicators show the current compo-
nent:
DVD/LD – DVD player or Laser Disc player.
TV/SAT– TV or satellite tuner.
CD – Compact Disc player.
MD/TAPE1/CD-R – Tape deck, Mini Disc recorder or CD
recorder connected to MD/TAPE 1/CD-R inputs/outputs.
TUNER – The receiver's built-in tuner.
PHONO – Turntable.
VIDEO – Video camera (etc.) connected to the VIDEO
INPUT on the front panel.
VCR1/DVR – Video cassette recorder connected to
VCR1/DVR inputs.
VCR 2 – Video cassette recorder or other component
connected to VCR 2 inputs.
10 PHONES jack
Connect headphones for private listening (no sound will
be heard through the speakers)
11 VIDEO INPUT jacks
S-VIDEO : Video input for connecting a video camera
(etc.), that has an S-Video out.
VSX-39TX, VSX-37TX, VSX-36TX, VSX-D909S
RF signal.
VIDEO / AUDIO (L/R) : Video input for connecting a
video camera, etc. that has standard video/audio
outputs.
12 SPEAKERS (A/B) button
Use to select the speaker system. A is the primary
setting. It plays all speakers hooked up to the A
system. A & B setting only plays the front speakers of
both the A & B systems and the subwoofer. Multi
channel sources will be down-mixed to these Speakers
so no sound will be lost. B setting only plays the front
speakers connected to the B system and multi channel
sources will be down-mixed to these two speakers.
The button cycles through the speaker systems as
follows: A]B]A&B]off.
13 VIDEO SELECT button
Switches the receiver between the various types of
video input.
14 TAPE 2 MONITOR button
Selects the tape deck (MD recorder, etc.) connected to
the TAPE 2 MONITOR inputs/outputs. Allows monitor-
ing of a recording as it's being made.
15 TUNER CONTROL buttons
CLASS – Press repeatedly to switch the preset station
classes.
BAND – Press to select the AM or FM band.
TUNING –/+ – Use to manually tune to radio stations.
MPX – Press to switch between auto stereo and
MONO reception of FM broadcasts. When the broad-
cast signal is weak, selecting MONO will improve the
sound quality.
MEMORY – Press to start the memorization of a
preset station.
STATION –/+ – Use to choose programmed radio
stations.
16 Source indicators
Shows the source currently selected.
17 MASTER VOLUME
Adjusts the overall receiver volume.
111