Using The Tuner; Setting The Am Tuner Interval Spacing; Tuning In A Station - JVC CA-D702T Instructions Manual

Using the Tuner

FM AM
FM AM
PRO LOGIC 3CH LOGIC TEST TONE
SHIFT
CENTER
– +
LEVEL CENTER MODE SLEEP
Number keys
REAR SOUND
– +
LEVEL DELAY TIME MODE
FM MODE
L BALANCE R S.A.BASS
/ ECHO
FM MODE
TAPE A TAPE B DIRECTION REPEAT
/ ECHO
DISC 1 DISC 2 DISC 3
CD CONTROL TAPE CONTROL
AUX REC PAUSE
+
MULTI CONTROL
VOLUME
–
Pressing FM or AM makes the
Remote Control ready for the
RM-SED702TXU REMOTE CONTROL
Tuner operations.
When the Unit is being operated
with the Remote Control, press
FM or AM first.
You can listen to both FM and AM stations. Stations can be tuned in manually, automatically, or from
preset memory storage.
Setting the AM Tuner Interval Spacing ——————————
Some countries space AM stations 9 kHz apart, and some countries use 10 kHz spacing. Europe, the U.K.,
Australia, and some other areas use 9 kHz spacing, while Canada, the United States, and some other
+
Western Hemisphere countries use 10 kHz spacing.

Tuning in a Station

Press FM/AM on the Unit (or FM or AM on the Remote Control) to turn
on the radio.
The frequency of the previously selected channel appears on the display.
DISC
DISC
DISC
Display
Before listening to the radio:
• Check that both the FM and AM antennas are firmly connected. (See page 4.)
To select the 10 kHz interval, be sure that the Unit is in STANDBY mode. Turn on by pressing
while holding down ¡ TUNING UP on the MULTI CONTROL. "AM --10" appears on the display.
To select the 9 kHz interval, be sure that the Unit is in STANDBY mode. Turn on by pressing
while holding down TUNING DOWN 1 on the MULTI CONTROL. "AM -- 9" appears on the
display.
PROGRAM
/RANDOM
REPEAT
EDIT
Band display, Frequency display, Preset channel
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
SET
MULTI CONTROL
FM/AM
When TUNER is selected
as the source, the button
lights up.
17