Usb Devices - Sony Playstation 3 Quick Reference

Basic operations
Playing content

USB devices

You can connect external devices, such as devices that are
compatible with USB Mass Storage Class, using a USB Cable.
Devices can be connected while the system is turned on. Refer also
to the instructions supplied with the device.
1
Connect the USB device.
An icon is displayed in the Home Menu.
External device such as a digital camera
2
Select the icon, and then press the
A list of playable content is displayed.
20
Notices
• Do not remove USB devices or turn off the system while data is being
• When using a USB fl ash drive with a write-protect switch, do not operate
File formats that can be played or viewed on this system include
ATRAC, MP3, AAC, JPEG and MPEG-4. For the latest information,
refer to the online user's guide (
Hints
• Only fi les that are playable or viewable on the PS3™ system are displayed in
the column for the compatible category (Example: Image data is displayed in
the Photo category).
• Depending on the storage media, only a subset of the folders on the media
button.
may be displayed. If you select "Display All" from the options menu
(
Notice
You should where possible make periodic back-ups of data stored on the
hard disk drive as a precaution against possible loss or corruption. If for any
reason software or data loss or corruption occurs, it is not possible to restore
or repair the software or data. Note that SCEE will not be liable for any loss
or corruption of data, fi les or software.
saved, loaded or deleted. Doing so may cause data loss or corruption.
the switch when the device is connected to the system. Doing so may
cause data loss or corruption.
File formats that can be played or viewed
page 3), all folders saved on the media will be displayed.
page 29).