Opening The Web Browser Interface - Intermec EasyLAN 10i2 User Manual

This chapter explains how to configure the EasyLAN 10i2 adapter for advanced and
network specific settings using the Web browser interface and network specific
utilities, such as Novell NWAdmin utility. For information on using console commands
to configure the EasyLAN 10i2 adapter, see Appendix A, "Console Commands."

Opening the Web Browser Interface

To configure the EasyLAN 10i2 adapter, you need to open the Web browser interface.
To open the Web browser interface
1. Start your Web browser.
2. In the Address (Internet Explorer) or Go to (Netscape) line, enter the IP address for
3. In the Server Access Password field, enter the password. The default password is
4. Click Submit. The Configuration and Management page appears.
the EasyLAN 10i2 adapter, and press Enter. The Server Access Password page
appears.
intermec.
Configuring the EasyLAN 10i2 Adapter
2
2-3