JVC RX-D701S Instructions Manual page 12

Do not connect the AC power plug to the wall outlet until all connections are completed.
7 Connecting a TV:
Connect the TV to the appropriate MONITOR OUT jacks to view the playback picture from any other connected video components.
Turn off all components before making connections.
• When you connect other components, refer also to their manuals.
MONITOR OUT
/DVD MONITOR
PLAY) OUT
VCR(DBS)
IN
Select the appropriate VIDEO OUTPUT (see page 32)
according to the terminal used for TV connection referring
to the table below.
Connection method
HDMI
Component video
S-video
Composite video
NOTES
• If connecting a TV only with the HDMI cable and setting the video input setting (see page 20) to "HDMI," the on-screen display does
not appear on the TV screen. When using on-screen display, set the video input setting to the setting other than HDMI.
• Select the audio and video input setting according to the connection method. See page 20 for details.
• In addition to using the HDMI cable, you can enjoy digital sound as well using a digital audio cable (coaxial or optical). For details of
digital audio connection, see page 16.
• When you enjoy contents protected by HDCP (High-Bandwidth Digital Content Protection, see page 1), connect a HDCP-compatible
TV to this receiver, otherwise, the picture may not appear properly.
10
HDMI cable (not supplied)
TV DB White
IN IN
L
Red
R
COMPONENT VIDEO Green
Y
Blue
P
Red
B
P
R
DVR/DVD MONITOR
IN OUT
S-video cable (not supplied)
Composite video cable (not supplied)
VIDEO OUTPUT
HDMI
CMPNT
S
C
Stereo audio cable
(not supplied)
Component video cable
(not supplied)
Ç
Å To left/right audio channel output
ı To HDMI input
Ç To component video input
• Connect Y, P , and P
B R
Î To S-video input
‰ To composite video input
DO NOT use a TV through a VCR or a TV with a built-in
VCR; otherwise, the picture may be distorted.
: signal current
Å ı
TV
Î ‰
correctly.