JVC RX-D701S Instructions Manual page 112

❏ Changing the transmittable signals for operating
a CATV converter or DBS tuner
1
Press and hold DBS/CATV
2
Press DBS.
3 Enter the manufacturer's code using buttons
1 – 9, and 0.
See "Manufacturers' codes for CATV converter" or
"Manufacturers' codes for DBS tuner" below.
4
Release DBS/CATV
Now, you can perform the following operation on the CATV
converter or DBS tuner.
DBS/CATV : Turn on or off the CATV converter or
DBS tuner.
After pressing DBS, you can perform the following operations
on the CATV converter or DBS tuner.
CHANNEL +/–: Change the channel numbers on the
CATV converter or DBS tuner.
1 – 10, 0, 100+ (+10): Select the channel numbers on the
CATV converter or DBS tuner.
See the instructions supplied with the CATV converter or DBS
tuner for details.
5
Try to operate your CATV converter or DBS
tuner by pressing DBS/CATV
When your CATV converter or DBS tuner turns on or off, you
have entered the correct code.
If more than one code is listed for your brand of CATV
converter or DBS tuner, try each one until the correct one is
entered.
Manufacturers' codes for CATV converter
Manufacturer
G.I. 01
Gemini 02
Hamlin 03, 04, 05, 06
Jerrold 07, 08, 09, 10, 11, 12, 13, 14, 15
Macom 16, 17, 18
Magnavox 19
Oak 20, 21, 22
Panasonic 23, 24
Philips 25, 26, 27, 28, 29, 30
Pioneer 31, 32
S. Atlanta 33, 34, 35
Samsung 36
Tocom 37
Zenith 38, 39
Manufacturers' codes for DBS tuner
Manufacturer
Echostar 40
G.I. 41
Hitachi 42
Hughes 43
Panasonic 44
Primestar 45
RCA 46
Sony 47
Toshiba 48
Initial setting: 40
52
.
.
.
Codes
Codes
❏ Changing the transmittable signals for operating
a DVD player
1
Set the mode selector to "DVD."
2
Press and hold DVR/DVD
3
Press DVR/DVD.
4
Enter the manufacturer's code using buttons
1 – 9, and 0.
See "Manufacturers' codes for DVD player" below.
5 Release DVR/DVD
Now, you can perform the following operation on the DVD
player.
DVR/DVD : Turn on or off the DVD player.
3:
Start playback.
4:
Return to the beginning of the current
chapter (or fast-forward for some
models).
¢:
Skip to the beginning of the next chapter
(or fast-reverse for some models).
7:
Stop playback.
8:
Pause playback.
DVD MENU: Display the menu recorded on DVD
VIDEO discs.
1 – 9, 0, +10: Select the chapter number.
After pressing DVR/DVD or DVD MENU, you can perform the
following operations on the DVD recorder and DVD player.
5/∞/3/2:
Select an item on the menu screen.
SET: Enter the selected item.
See the instructions supplied with the DVD player for details.
6 Try to operate your DVD player by pressing
DVR/DVD .
When your DVD player turns on or off, you have entered the
correct code.
Manufacturers' codes for DVD player
Manufacturer
JVC 01
Hitachi 02
Kenwood 03, 04
Magnavox 05
Marantz 06
Mitsubishi 07
Onkyo 08, 09
Panasonic 10
Philips 06
Pioneer 11
Proscan 12
RCA 12
Samsung 13
Sony 14
Toshiba 05
Yamaha 15
Zenith 05, 16
Initial setting: 01
If more than one code is listed for your brand of DVD player,
try each one until the correct one is entered.
NOTE
You cannot use this remote control to operate other
manufacturers' DVD recorder.
Manufacturers' codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
.
.
Codes