06 Wheels and tires
Tire Pressure Monitoring System (TPMS)
tion pressure table on page 228), for example,
if higher inflation pressure is necessary when
transporting heavy loads, etc.
This is done in the vehicle's menu system (see
page 122).
To recalibrate:
1. Switch off the engine.
2. Inflate the tires to the desired pressure and
put the ignition in mode I or II (see page
78 for additional information).
3. In the menu system, select
Tire pressure
4. Select
Calibrate tire pressure
ENTER.
5. Drive the vehicle at a speed above
25 mph (40 km/h) continuously for at least
1 minute.
06
> This recalibrates TPMS to the new infla-
tion pressure.
Activating/deactivating TPMS (Canadian
models only)
1. Switch off the engine.
2. Put the ignition in mode I or II (see page
78 for additional information).
3. In the menu system, select
Tire pressure
248
4. Select
ENTER.
> An
Car settings
and press ENTER.
and press
Car settings
and press ENTER.
Tire pressure system
and press
X
is displayed if the system is acti-
vated and disappears when the system
is deactivated.
I n f o r m a t i o n P r o v i d e d b y :