Using The Active Connections Monitor; Using Log > View - SonicWALL NSA 2400 Getting Started Manual

Using the Active Connections Monitor

The Active Connections Monitor displays real-time,
exportable (plain text or CSV), filterable views of all connections
to and through the SonicWALL security appliance. This tool is
available on the Systems > Diagnostics page.
You can filter the results to display only connections matching
certain criteria. You can filter by Source IP, Destination IP,
Destination Port, Protocol, Src Interface and Dst Interface.
Enter your filter criteria in the Active Connections Monitor
Settings table.
The fields you enter values into are combined into a search
string with a logical AND. Select the Group Filters box next to
any two or more criteria to combine them with a logical OR.
Page 52 Troubleshooting Diagnostic Tools
Using Log > View
The SonicWALL security appliance maintains an Event log for
tracking potential security threats. You can view the log in the
Log > View page, or it can be automatically sent to an email
address for convenience and archiving. The log is displayed in
a table and can be sorted by column.
You can filter the results to display only event logs matching
certain criteria. You can filter by Priority, Category,
Source (IP or Interface), and Destination (IP or Interface).
The fields you enter values into are combined into a search
string with a logical AND. Select the Group Filters box next to
any two or more criteria to combine them with a logical OR.