Security Service Dashboard; Deploying Sonicpoints For Wireless Access; Updating Sonicpoint Firmware - SonicWALL NSA 2400 Getting Started Manual

Security Service Dashboard

The SonicOS Security Dashboard displays local and global
statistics on blocked threats. The Security Dashboard is
accessable from the System > Security Dashboard page in
the SonicOS management interface.
Deploying SonicPoints for Wireless
Access
This section describes how to configure SonicPoints with the
SonicWALL NSA 2400. See the following subsections:
•

Updating SonicPoint Firmware

• Configuring SonicPoint Provisioning Profiles
• Configuring a Wireless Zone
• Assigning an Interface to the Wireless Zone
• Connecting the SonicPoint
Page 46 Security Service Dashboard
- page 46
- page 47
- page 48
- page 50
- page 50
SonicWALL SonicPoints are wireless access points specially
engineered to work with SonicWALL security appliances to
provide wireless access throughout your enterprise. The
SonicPoint section of the SonicOS management interface lets
you manage the SonicPoints connected to your system.
Before you can manage SonicPoints in the Management
Interface, you must first:
• Verify that the SonicPoint image is downloaded to your
SonicWALL security appliance.
• Configure your SonicPoint provisioning profiles.
• Configure a Wireless zone.
• Assign profiles to wireless zones. This step is optional. If
you do not assign a default profile for a zone, SonicPoints
in that zone will use the first profile in the list.
• Assign an interface to the Wireless zone.
• Attach the SonicPoints to the interface in the Wireless zone
and test.
Updating SonicPoint Firmware
If your SonicWALL appliance has Internet connectivity, it will
automatically download the correct version of the SonicPoint
image from the SonicWALL server when you connect a
SonicPoint device. Otherwise, see the SonicOS Enhanced
Administrator's Guide for the correct procedure.