Last Error Code Saved During No Play - Panasonic DVD-S42EE Service Manual

Error Code Error Content
F611 6626 QCODE
read Error
F612 No CRC OK
specific time
F630 No reply to KEY DET
enquiry
F631 CPPM KEY DET is not
available till the FILE
terminal
F632 CPPM KEY DET is not
available
Disc code
F103 Illegal highlight Position Big possibility of disc specification violation during
HIC Error
F4FF Force initialize failure
(time out)
Micro computer error
F700 MBX overflow
F701 Message command
does not end
F702 Message command
changes
F880 Task number
appropriate
F890 Sending message when
message is being sent
to AV task
F891 Message couldn't
sent to AV task
F893 FROM falsification
F894 EEPROM abnormality
F895 Language
abnormality
F896 No existence model
F897 Initialize is
completed
F898 Disagreement
hardware and software
F8A0 Message command is
not appropriate
Note:
An error code will be canceled if a power supply is turned OFF.
*1: CPPM is the copy guard function beforehand written in the disk for protection of copyrights.
9.4.

Last Error Code saved during NO PLAY

Error code Error Content
F0BF 6) Cannot
physical layer is not recoginizable
F0C0 8) DVD: Cannot playback because it
is not DVD Video/Adio/VR
F0C1 9) DVD: Prohibited by the restricted
region code
F0C2 A) DVD: PAL restricted playback
F0C3 B) DVD:
prohibits the playback of the entire
title
F0C4 C) VCD: Prohibited because it is in
PHOTO CD fromat
F0C5 VCD/CD: Prohibited because it is
CDROM without CD-DA
Additional error explanation
don't Access failure to seek address in CD series
for a Access failure to ID data in DVD series
(for internal use only)
(CPPM file system is unreadable caused by
scratches)
Been revoked or falsified
highlight display
When replying message to disc manager
Next message is sent before replying to disc
manager
Message is changed before it is sent as a reply to
disc manager
is not Message coming from a non-existing task
Sending message to AV task
be Begin sending message to AV task
area Firm version agreement check for factory preset
setting failure prevention
Firm version agreement check for factory preset
setting failure prevention
not Initialize completion check for factory preset
setting failure prevention
of Unsuitable combination of AV DECORDER,
SDRAM and FLASH ROM (firmware)
Begin sending message to AV task
playback because PCND_NOPLAY
0x50
PCND_NOPLAY VIDEO 0x70
PCND_NOPLAY RCD 0x80
PCND_NOPLAY PAL 0x90
Parental lock setting PCND_NOPLAY PTL 0xA0
PCND_NOPLAY
0xB0
PCND_NOPLAY CDROM 0xC0 DiscManager
DVD-S42EE / DVD-S42GC / DVD-S42GCA / DVD-S42GCS / DVD-S42GCU / DVD-S42PL / DVD-S42PLA
Defect 1
DV3.2
(IC8001)
DV3.2
(IC8001)
DISC
DISC
DISC
EEPROM
(IC8611)
FROM
(IC8651)
EEPROM
(IC8611)
FROM
(IC8651)
System computer Setting task
PHYSICAL DriveManager
DiscManager
DiscManager
DiscManager
DiscManager
PHOTO CD DiscManager
25
Defect 2 Defect 3
CPPM
(*1)
EEPROM CPPM
(IC8611) (*1)
DV3.2
(IC8001)
DV3.2
(IC8001)
Serial
communication on lone
System computer internal error code
0xDOBF
0xDOC0
0xDOC1
0xDOC2
0xDOC3
0xDOC4
0xDOC5
Defect 4