Table of Contents
Advertisement
8. Pull the shaft and the rubber out.
<Assembling the optical pickup unit>
1. Pass the intermediate FPC through the frame hole.
2. Align the guide section of the optical pickup unit with the
rail.
3. Install the shaft top to the holder.
DVD-S42EE / DVD-S42GC / DVD-S42GCA / DVD-S42GCS / DVD-S42GCU / DVD-S42PL / DVD-S42PLA
4. The intermediate FFC is fixed as shown below.
8.7.
Traverse Motor
1. Unscrew the screws.
2. Remove the cover while lifting the inner gear.
21
Advertisement
Table of Contents
