Table of Contents
Advertisement
5. Make sure that the tray and the drive arm move
smoothly.
8.4.
Loading section
1. Spread the tabs at the both sides and push out the drive
arm shaft.
2. Hook the lock lever spring on the lock lever projection part
temporarily.
3. Unlock the tab and remove the lock lever.
DVD-S42EE / DVD-S42GC / DVD-S42GCA / DVD-S42GCS / DVD-S42GCU / DVD-S42PL / DVD-S42PLA
4. Remove the belt.
5. Unlock the tab and remove the pulley.
6. Remove the relay gear.
7. Turn the change lever in the arrow direction till it stops.
8. Hook the change lever spring on the change lever project
part temporarily.
17
Advertisement
Table of Contents
