JVC RX-665VBK Instructions Manual page 25

5. Repeat steps 1 to 4 until you store all the stations
you want.
To cancel a stored preset station
Storing a new station on a used number erases the previously stored one.
To tune in a preset station
On the front panel:
1. Press TUNER/BAND so that the Control 5 5 5 5 5 / ∞ ∞ ∞ ∞ ∞ / 2 2 2 2 2 /
3 3 3 3 3 buttons work for tuner settings.
The lamp above the button lights up.
2. Press Control 5 5 5 5 5 / ∞ ∞ ∞ ∞ ∞ until "–PRESET+" appears on
the display.
3. Press Control 2 2 2 2 2 / 3 3 3 3 3 to select a preset channel.
Each time you press the button, the preset channels changes.
• Pressing Control 2 changes preset channels in
decreasing order.
• Pressing Control 3 changes preset channels in
increasing order.
From the remote control:
1. Press TUNER/BAND.
Each time you press the button, the band alternates
between FM and AM.
2. Press 10 keys to select a preset channel number.
• For channel number 5, press 5.
• For channel number 15, press +10 then 5.
• For channel number 20, press +10 then 10.
• For channel number 30, press +10, +10, then 10.
TUNER/BAND
DAP MODE 3D-PHONIC SURROUND
1 2 3
EFFECT DELAY TEST
4 5 6
SEA MODE SEA PRESET MENU
7/P 8 9
100+
– REAR•R + RETURN/ENTER
+10 0 10
Note:
If you adjust the sound by using
SOUND CONTROL while
listening to a station, the 10 keys
will work for adjusting the sound.
To select a preset channel
number after the sound
adjustment, press TUNER/BAND
again, so the 10 keys will work for
selecting the preset channel
numbers.
22