Philips DVDR630VR Service Manual page 162

DISASSEMBLY AND ASSEMBLY OF DECK MECHANISM
1. Disassembly of Drum Assembly
(Figure A-1)
1) Separate cable flat from the Drum FPC and the Capstan
Motor.
2) Release 3 screws (S1) on the bottom side of the chassis,
and separate the drum assembly.
3) Release the hooks (H1, H2) and separate both the holder
FPC and the Cap FPC (disassemble if necessary).
Drum Assembly
(S1)
H2
Fig. A-1
Cautions in assembly of FPC
Holder FPC
Assembly shape seen in the reverse direction
4-2
Cable Flat
(S1)
(S1)
Cap, FPC
H1
Holder FPC
Cap FPC
Drum FPC