Philips DVDR630VR Service Manual page 137

2. ALPC Program Configuration
ALPC Program consists of total 4 files.
ALPC.exe
LgBada.dll
modelnm.txt
WNASPI32.DLL
These 4 files should be located in one directory.
ALPC.exe is a program execution file.
modelmn.txt is a configuration file.
Determine how to connect
The following contents are included when you open "modelnm.txt" file.
The following contents are included when you open LGE connect=0
connect=0 is the item which you can determine whether you use Serial or ATAPI.
0 : ATAPI
1 : Serial
Thus, select connect=0 to use ATAPI, or select connect=1 to use Serial, then save the file.
(For SVC, ATAPI setting is recommended.)
3-156