1
Removing the Monitor Unit 1/2 (Fig.6)
1
Remove the two screws and then remove
the Spring.
A
2
Remove the screw and then remove
the Arm and Cover.
3
Disconnect the connector.
4
Remove the five screws and then remove
B
the Cover.
5
Disconnect the connector.
C
Remove the three screws and then remove
6
the Motor Unit.
Removing the Motor Unit, the Drive Unit
can operate to lead to the Monitor Assy.
D
Remove the two screws and then remove
7
the two Guids(Right side, Left side).
Pull out the Monitor Assy in the direction
8
indicated by an arrow.
E
F
92
1
2
Cover
4
7
Monitor Assy
6
AVH-P5200BT/XNUC
2
3
Spring
Arm and Cover
1
4
2
1
3
4
8
6
5
6
Motor Unit
3
4
4
4
7
Fig.6
4