Using The User File (Only For The Cd Player With The User File Function) - JVC RX-1024VBK Instructions Manual

TEXT COMPU LINK Remote Control System
Using the User File (Only for the CD Player with the User
File Function)
You can use the User File function through this receiver.
For the User File function, refer to the manual supplied with your CD player.
Using your own User Files:
1. Display the disc information screen by following the procedure on page 50.
2. Press ON SCREEN CONTROL % / fi to move
press SET.
The USER FILE screen appears on the TV.
To show the unseen user files, press ON SCREEN CONTROL % / fi until they
appear.
3. Press ON SCREEN CONTROL % / fi to move
then press SET.
The selected User File screen appears on the TV.
The disc information shown will be the disc title. (If no disc title information is
recorded for the discs, only the disc numbers will be shown.)
4. On this selected User File screen, you can do the following:
• Changing the indication of the disc information: Press ON SCREEN
CONTROL % / fi to move
/ #, the disc information alternates between its disc title and its performer.
• Starting a disc play: Press ON SCREEN CONTROL % / fi
then press SET.
• Showing unseen disc information (if more than 5 discs are listed): Press ON
SCREEN CONTROL % / fi to move
• Going back to the USER FILE screen: Press EXIT.
53
to "USER FILE," then
to the User File you want,
to a disc, then press @ / #. Each time you press @
to (or ) and press SET.
to a disc,
to move
USER FILE screen
User File 1 screen