Creating Your Own Sea Mode; Basic Settings - JVC RX-1024VBK Instructions Manual

Using the On-Screen Menus

Creating Your Own SEA Mode

1. Press any button of ON SCREEN CONTROL % / fi / @ / # once.
The MAIN MENU appears on the TV.
2. Press ON SCREEN CONTROL % / fi to move
then press @ / #.
The SOUND CONTROL menu appears.
3. Press ON SCREEN CONTROL % / fi to move
The SEA menu appears.
4. Press ON SCREEN CONTROL % / fi to move
press @ / #.
The SEA ADJUST menu appears.
5. Press ON SCREEN CONTROL % / fi / @ / # to adjust the SEA mode as you
want.
@ / # : Select the frequency ranges.
% / fi : Adjust the frequency levels.
6. Press SET to store the setting into the SEA USERMODE.
• If you press EXIT, without pressing SET in this step, you can return to the SEA
menu. (The adjustment you have made is active but not stored.)
7. When you finish, press EXIT repeatedly until the menu disappears from the
TV.

Basic Settings

1. Press any button of ON SCREEN CONTROL % / fi / @ / # once.
The MAIN MENU appears on the TV.
2. Press ON SCREEN CONTROL % / fi to move
@ / #.
The SETTING 1 or SETTING 2 menu appears.
3. Press ON SCREEN CONTROL % / fi to the setting item you want to adjust.
• To go to the SETTING 2 menu, move
• To go back to the SETTING 1 menu, move
press @ / #.
On the SETTING 1 and 2 menus, you can do the following:
"SUBWOOFER": Set the subwoofer information
"FRONT SPK": Set the front speaker information (
"CENTER SPK": Set the center speaker information
"REAR SPK": Set the rear speaker information
"CNTR DELAY": Adjust the delay time of the center speaker output
"REAR DELAY": Adjust the delay time of the rear speaker output
"CROSSOVER": Set the crossover frequency
"LFE ATT.": Set the low frequency effect attenuator level
"COMP.": Set the dynamic range compression
"DIGITAL 1/2/3": Set the digital input terminal
45
(Also see page 27)
to "SOUND CONTROL,"
to "SEA," then press @ / #.
to "SEA ADJUST," then
to "SETTING," then press
to "NEXT PAGE," then press @ / #.
to "PREVIOUS PAGE," then
(See page 18).
See page 19).
(See page 19).
(See page 19).
(See page 20).
(See page 20).
(See page 21).
(See page 21).
(See page 19).
MAIN MENU
MAIN MENU
SOURCE :VCR1
VISUAL :VCR1
MODE
* *
* *
* *
VOLUME : 20
SOUND CONTROL menu
SOUND CONTROL
SURROUND LEVEL
* *
* *
BAL.:CNTR
LOUDNESS
INPUT ATT
SUBWFR LEVEL:
SEA menu
SEA
SEA MODE
* *
SEA ADJUST menu
SEA ADJUST
SEA USERMODE
SETTING 1 menu
SETTING 1
SUBWOOFER
FRONT
CENTER SPK : SMALL
REAR
CNTR DELAY : 3msec
REAR DELAY : 5msec
* *
SETTING 2 menu
(See page 20).
SETTING 2
CROSSOVER
LFE ATT.
COMP.
DIGITAL 1
DIGITAL 2
DIGITAL 3
* *
:OFF
SOUND CONTROL
* *
TUNER CONTROL
* *
SETTING
* *
:ENTER
* *
SEA
* *
: OFF
: NORMAL
0dB
NEXT PAGE
:ENTER
:ROCK
SEA ADJUST
* *
100 1k 10kHz
:OPERATE
100 1k 10kHz
SET:MEMORY
: NO
SPK : LARGE
SPK : LARGE
NEXT PAGE
* *
:ENTER
:100Hz
: 0dB
: OFF
: DBS
: CD
: MD
PREVIOUS PAGE
* *
:ENTER