Operating Other Manufacturers' Video Equipment - JVC LVT0178-001A Instructions Manual

Operating Other Manufacturers' Video Equipment

This remote control supplied with the receiver can transmit control
signals for other manufacturers' VCRs, TVs, CATV converters and
DBS tuners. By changing the transmittable signals from preset ones
to the other manufacturers', you can operate the other
manufacturer's components using this remote control.
When operating the other manufacturers' components, refer also to
the manuals supplied with them. To operate these components with
the remote control, first you need to set the manufacturer's code
each for VCR, TV, CATV converters, and DBS tuner.
TV/CATV/DBS VCR 1
DVD DVD MUILTI CD TAPE/MD
TV/DBS VIDEO PHONO FM/AM
VCR 1 VCR 2 ANALOG/DIGITAL SLEEP
SURROUND CNTR TONE CNTR
1 2 3
ON/OFF
MENU MENU
SURROUND TEST REAR-L
4 5 6
MODE
ENTER ENTER
DISC
EFFECT REAR-R
7 8 9
/P
SOUND
SEA MODE SUBWOOFER
0 +10
10
RETURN FM MODE/MUTING 100+
AUDIO/
TV/VCR
MENU
CATV/DBS
SET
TEXT
EXIT
DISPLAY
TV VOL CHANNEL VOLUME
TV/VIDEO VCR 1 TAPE MUTING
CONTROL
/REW PLAY FF/
DOWN TUNING UP
REC STOP PAUSE
RM-SRX889P REMOTE CONTROL
AUDIO/
TV/VCR
CATV/DBS
Check to see if its remote
control mode selector is set to
the correct position.
To operate the audio
system, TVs, and VCRs, set it
to "AUDIO/TV/VCR."
To operate the CATV
converter and DBS tuner, set
it to "CATV/DBS."
To change the transmittable signals for
operating another manufacturer's TV
1. Set the remote control mode to "AUDIO/TV/
VCR."
2. Press and hold TV/CATV/DBS
3. Press TV/DBS.
4. Enter manufacturer's code (three digits) using
buttons 1 – 9, and 0.
See the list on pages 46 and 47 to find the code.
Examples: For a JVC product, press 0, 3, then 6.
For a Hitachi product, press 0, 3, then 6.
5. Release TV/CATV/DBS
The following buttons can be used for operating the TV (with
the remote control mode selector set to "AUDIO/TV/VCR"):
TV/CATV/DBS :
Turns on and off the TV.
TV VOL +/–:
Adjusts the volume.
TV/VIDEO: Sets the input mode (either TV
or VIDEO).
After pressing TV/DBS (with the remote control mode selector
set to "AUDIO/TV/VCR"), you can perform the following
operations on a TV:
CHANNEL +/–:
Changes the channels.
1 – 10, 0, 100+ (+10): Selects the channels.
100+ (+10) button will function as
the ENTER button if your TV requires
pressing ENTER after selecting a
channel number.
Note:
Refer to the manual supplied with your TV.
6. Try to operate your TV by pressing TV/CATV/
DBS .
When your TV turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of TV,
try each one until the correct one is entered.
.
.
44