Chevrolet Colorado 2015 Owner's Manual page 252

Warning
Shifting the transfer case to
N (Neutral) can cause the vehicle
to roll even if the transmission is
in P (Park). You or someone else
could be seriously injured. Be
sure to set the parking brake
before placing the transfer case in
N (Neutral). See Parking Brake on
page 9-41.
Caution
Extended high-speed operation in
4 may damage or shorten the
life of the drivetrain.
Engagement noise and bump when
shifting between 4 and 4 or from
N (Neutral), with the engine running,
is normal.
Shifting into 4 will turn Traction
®
Control and StabiliTrak
Traction Control/Electronic Stability
Control on page 9-42.
Electronic Transfer Case
Use the transfer case knob, next to
the steering wheel, to shift into and
out of four-wheel drive for extra
traction.
Indicator lights on the knob show
which setting the transfer case is in.
The N (Neutral) indicator is on the
face of the knob. The indicator lights
display briefly when the ignition is
Driving and Operating
turned on, and one will stay on.
If the lights display momentarily
off. See
when the ignition is in ON/RUN, but
none stay on, the knob may have
been turned while the vehicle was
off. To see the indicator, turn the
knob to another position so that it
matches the actual transfer case
setting. If no lights display, take the
vehicle to your dealer for service.
An indicator light flashes while
shifting and until the shift is
complete.
If the transfer case cannot complete
a requested shift, it will return to the
last chosen setting. Turn the control
back to the previous setting to see
the indicator light.
Shifting the transmission into gear
before the requested mode
indicator light has stopped
flashing could damage the
transfer case.
9-37
Caution