Chevrolet Colorado 2015 Owner's Manual page 185

7-22 Infotainment System
current voice recognition event and
plays the prompt Make your
selection from the list using the
manual controls or press the
BACK button to try again.
If manual selection takes more than
15 seconds, the session terminates
and prompts that it has timed out.
The screen returns back to the
screen where voice recognition was
initiated.
The Back Command
Say Back or press the
button to go to the previous screen.
If in voice recognition, and Back is
stated all the way through to the
initial screen, then Back is stated
one more time, the voice recognition
session will cancel.
Help
Say Help on any voice recognition
screen and the help prompt for the
screen is played. Additionally, a
pop-up displays a text version of the
help prompt. Depending on how
voice recognition was initiated, the
Help pop-up will either display on
the instrument cluster or the
infotainment screen. Press the
faceplate button below the Dismiss
screen button to make the pop-up
go away.
Selecting
playing will terminate the prompt
and a beep will be heard. Doing this
will stop the help prompt so that a
voice command can be used.
Voice Recognition for the
BACK
Radio
Select from the infotainment
screen to launch audio voice
recognition. When selected, the
voice commands for radio and
media features are available.
Switch to AM : Switch bands to
AM and tune to the last AM radio
station.
Switch to FM : Switch bands to
FM and tune to the last FM radio
station.
while the help prompt is
Switch to XM : Switch bands to
SiriusXM and tune to the last
SiriusXM channel.
Tune to <AM frequency> AM :
Tune to the radio station whose
frequency is identified in the
command (like nine fifty ).
Tune to <FM frequency> FM :
Tune to the radio station whose
frequency is identified in the
command (like one o one
point one ).
Tune to XM <XM channel
number> : Tune to the SiriusXM
radio station whose channel number
is identified in the command.
Tune to XM <XM channel
name> : Tune to the SiriusXM
radio station whose channel name
is identified in the command.