Procedure in the event of an error
If the update procedure fails or your phone
does not work properly following the
update, repeat the update procedure as fol-
lows:
¤
Close the "Gigaset QuickSync" program
on the PC.
¤
Remove the USB data cable from the tel-
ephone.
¤
Remove the battery (
¤
Replace the battery.
¤
Complete the firmware update as
described.
If the update procedure fails several times or
you can no longer connect to the PC, pro-
ceed as follows:
¤
Close the "Gigaset QuickSync" program
on the PC.
¤
Remove the USB data cable from the tel-
ephone.
¤
Remove the battery (
¤
Press and hold keys 4 and L with
the index and middle finger.
¤
Replace the battery.
¤
Release keys 4 and L. The message
key f and the talk key c will flash
alternately.
¤
Complete the firmware update as
described.
¢
page 13).
¢
page 13).
Customer Service & Assistance
85