Programming; Adjusting The Ringer Volume - Panasonic VL-SW250BX Operating Instructions Manual

Adjusting the ringer volume

You can adjust the following ringer volumes by using the main monitor station or the sub monitor station during
standby.
LThe ringer heard when receiving calls from the door station. (3 levels and "OFF" are available.)
LThe ringer for paging calls. (3 levels are available.)
Main monitor station
1
Press {MENU}, then select "RING TONE
SETTINGS" by pressing {VOLUME} ( ) or
{PAGE} (▲).
2
Press {MENU} (OK), then select "RING VOLUME"
by pressing {VOLUME} ( ) or {PAGE} (▲).
3
Press {MENU} (OK), then select the desired item
to change the setting by pressing {VOLUME} ( )
or {PAGE} (▲).
DOOR STATION
PAGE
4
Press {MENU} (OK), then select the desired
volume by pressing {VOLUME} ( ) or
{PAGE} (▲).
RING VOLUME/DOOR STATION
●
HIGH
MEDIUM
Current
LOW
setting
OFF
LThe ringer sounds at the selected volume level.
– When "OFF" is selected, 2 short beeps sound.
5
Press {MENU} (OK).
L"r" moves to the selected item.
6
To end the operation, press {OFF}.
Note:
LYou can also adjust the ringer volume while
receiving a call.
1 Press {VOLUME}.
RING VOLUME
2 Press {PAGE} (-) or {MENU} (+).*
LYou can also adjust the ringer volume for calls from
the door station during standby.
Press {VOLUME}. Press {PAGE} (-) or
{MENU} (+).*
1
* 1 To turn off the ringer volume for calls from the door
station, press and hold {PAGE} (-) until 2 short
beeps sound.
– To turn the ringer on, press {MENU} (+).
1
Press {MENU}, then select "RING VOLUME" by
pressing { } or {▲}.
2
Press {D} (OK), then select the desired item to
change the setting by pressing { } or {▲}.
3
Press {D} (OK), then select the desired volume by
pressing { } or {▲}.
Current
setting
LThe ringer sounds at the selected volume level.
– When "OFF" is selected, 2 short beeps sound.
4
Press {D} (OK).
L"r" moves to the selected item.
5
To end the operation, press {OFF}.
Note:
LYou can also adjust the ringer volume while
receiving a call by pressing { } or {▲} . *
* 1 To turn off the ringer volume for calls from the door
station, press and hold {▼} until 2 short beeps
sound.
– To turn the ringer on, press {▲}.
1

Programming

Sub monitor station
DOOR
PAGE
VOLUME/DOOR
● HIGH
MEDIUM
LOW
OFF
1
33