Panasonic VL-SW250BX Operating Instructions Manual page 11

Monitor display (Main monitor station)
The following display is an example for description purposes, and it may differ from the actual display.
LThe monitor display is turned off during standby.
<Display during operation>
A B
F
N Operation guidance
Available functions are shown on the bottom of the display. Press the appropriate button for the operation.
LThe display varies depending on the operation.
Example: When setting a function
To hide the guidance that overlaps the image:
When the display shows images (for example, during a call and while monitoring), you can temporarily
hide the guidance to easily view the whole image. (See "Hiding the operation guidance" on page 19.)
A Indicates which door station or sub monitor station is
C D E
B Indicates which door station is calling while talking
C
D Indicates an image is being taken by the door
E Indicates that the "Press-to-talk" mode is on (page
F Indicates that the door is opened when the door
Press the button for the function directly above it.
Example: To operate "d", press {VOLUME}.
In these Operating Instructions, the button and
function displayed above are indicated as follows.
Press {VOLUME} (d).
calling, monitoring, or in a call. Also indicates which
door station took the image while viewing it.
(Example)
: Door station 1
: Sub monitor station 1
or monitoring (page 22).
(Example)
: Door station 2
: Indicates the voice changer mode is on (page
19).
: Indicates that one of the PBX extensions
connected to the main monitor station is
being used for a call from the door station.
station.
20).
opener (sold separately) is connected to the main
monitor station (page 20).
The displayed function is not stated when
the corresponding button name means
the same as the displayed function.
Preparation
11