Installation Procedures; Transportation Precautions; Unpacking - Pioneer PDP-425CMX Technical Manual

Installation Procedures

3.3 Installation Procedures

3.3.1 Transportation precautions

• Once the shipping container is opened, transporting the unit in its packaging should be handled by two or more
people. To avoid injury or damage, do not lift the package by its packing bands.
• When transporting or storing the unit, always position it vertically - never horizontally. Horizontal transportation or
storage invalidates the product warranty.
• In transportation or storage of products in original packing, never stack more than three units high.
• For transportation or storage, observe the warnings and instructions on the upper face of the carton.
• The Plasma Display is made of glass. Please handle the panel carefully to prevent it from being damaged.

3.3.2 Unpacking

The original packing material can be re-used to safely ship the Plasma Display. When repacking, it is important to use
the material in the same way as when the unit originally shipped. Failure to pack the panel correctly can damage the
Plasma Display.
1) Packing specifications; 1177 mm (W) × 767 mm (H) × 354 mm (D), 38 kg
Ref. No. Terms
1 Upper Carton
2 Carton
3 Reinforce Pad
4 Pad
5 Pad
6 Mirror Mat
7 Power Cable Case
8 Accessory Case
9 Power Cord
10 Remote Control Unit
11 Dry Cell Battery (R6P, AA)
12 Remote Control Unit Holder
13 Display Stand
14 Vinyl Bag's Assembly
15 Wiping Cloth
16 Operating Instructions
17 Warranty Card Vinyl Pouch
18 Caution Sheet
19 Caution Sheet
20 Warranty Card
21 Vinyl Bag
22 Bag
23 Screw Set
24 Reuse Band
25 Nylon Binder
26 Ferrite Core (S)
27 Ferrite Core (L)
22
1
3
4
18
6
9
7
5
5
5
2
17
14
8
15
16
19
20
22
23
24
25
26
27
12
21
13
10
11