Playing Back A Tape; Playing Back A Disc - JVC UX-P450 Instructions Manual

3
Select a preset number for the station you store.
Examples:
AUDIO SUB TITLE ANGLE
1 2 3
To select preset number 5, press
ZOOM DVD LEVEL VFP 5.
4 5 6
To select preset number 15,
REV. MODE FM MODE
press +10, then 5.
8 9
7
To select preset number 30,
press +10, +10, then 10.
10 10
• You can also use the ¡ or 1 buttons.
4
Store the station.
SET
To tune in to a preset station
1
Select the band (FM or AM).
2
Select a preset number for the station you store.
• You can also use the ¡ or
AUDIO SUB TITLE ANGLE
1 2 3
ZOOM DVD LEVEL VFP
4 5 6
REV. MODE FM MODE
7 8 9
10 10

Playing Back a Tape

To insert a tape
You can play back tapes of types I, II, and IV.
Push Insert
With the tape side facing outside
12
Remote
ONLY
FM AM
1 buttons.
Close
To start:
To rewind tape:
Before or after play...
GROUP/TITLE
Rewind the tape to the right.
Rewind the tape to the left.
To change the tape running direction
3 (forward play)
2 (reverse play)
To reverse the tape automatically
REV. MODE
7
(at the same time)
Tape is played from the forward side to the
reverse side. When the reverse side is played
back, playback stops.
Tape is automatically reversed, and playback
repeats until you stop it.
Tape will not be reversed. When the current
side of the tape reaches its end, playback stops.

Playing Back a Disc

IMPORTANT: Before playing a disc, make sure of the
following...
• Turn on the TV and select an appropriate input mode on
the TV to view the pictures or on-screen displays on the
TV screen.
• For disc playback, you can change the initial setting to
your preference. See "Setup Menu Operations" on
page 33.
If " " appears on the TV screen when you press a
button, the disc cannot accept the operation you have
tried to do, or data required for that operation is not
recorded on the disc.
To stop: