Reducing Power Consumption When The Machine Is Not In Use (Power Save Mode) - Toshiba e-Studio287cs User Manual

•
Reducing Power Consumption When the Machine
is not in Use (Power Save Mode)
When the machine has been idle for a certain
period of time, it automatically enters power
save mode to reduce power consumption. You
can enter the power save mode manually by
pressing the [ENERGY SAVER] button on the
operator panel.
Q Power Save Mode
•
Press the [ENERGY SAVER] button to enter power
save mode.
•
When the machine is idle for 5 minutes, it
automatically enters the power save mode.
& If you want to change the amount of time that
elapses before entering the power save mode,
press the [USER FUNCTION] button, and then
configure in [ADMIN] - [GENERAL] - [ENERGY
SAVER] - [AUTO POWER SAVE].
•
You can send loaded documents to memory or print
received documents even in power save mode.
•
When in power save mode, the number of times an
incoming call will ring will be longer than the set
value.
•
When in power save mode, the [ENERGY SAVER]
button glows green.
•
When you press the [ENERGY SAVER] button in
power save mode, the machine returns to normal
standby mode.
Note
•
If an error occurs and a message appears, as when
the toner is empty, the [ENERGY SAVER] button can
not be used.
Memo
•
When restoring the machine from power save mode,
open and close the document holder cover, otherwise
the document size will not correctly be recognized
if you have placed a document on the platen (glass
surface).

Reducing Power Consumption When the Machine is not in Use (Power Save Mode)

- 53 -
1
2
3
4
5
6