JVC UX-J99DVD Instructions Manual page 52

Recording on an MD
On the remote control ONLY:
3
Press TR. MARK SELECT to select
track mark entry mode.
• Each time you press the button, entry mode changes as
follows:
MANUAL MARK
AUTO MARK
MANUAL MARK* Separates tracks manually by adding
track marks at the places where you
want.
• Press SET to add a track mark while
recording.
TIME AUTO MARK* The unit automatically separates and put
a track mark every 5 minutes.
• By pressing SET, you can also enter a
track mark manually.
AUTO MARK* The unit automatically separates and put
a track mark if there is a silence of 3
seconds or more between tracks.
• By pressing SET, you can also enter a
track mark manually.
* See "About the track marks" on page 45 for details.
4
Press MD REC.
The REC (MD recording) indicator starts flashing
on the display.
MD TAPE
REC 2
LP
x 1
GROUP
Ex.: When recording a tape using LP2 and Group recording.
When the source is "FM" or "AM," recording starts.
When the source is "TAPE," playback and recording start—
Synchronized Recording.
When the cassette player stops, recording also stops
automatically.
When the source is "AUX" or "AUX-DIGITAL," playback
starts after "AUX = MD" (for AUX) or "AUX-D = MD" (for
AUX-DIGITAL) appears on the display.
To stop recording, press 7.
"WRITING" flashes on the display.
Important:
While "WRITING" is flashing on the display, do not give any
shock to the unit. Otherwise, the MD might not be able to
play back anymore.
49
(Continued)
TIME AUTO MARK
• When recording from an external equipment ("AUX" or "AUX-
DIGITAL")
Recording starts automatically when the source sound comes into the unit,
and stops automatically if no sound comes into the unit for about 30
seconds (Sound Synchronized Recording).
When no sound comes into the unit, "STANDBY" will flash on the
display.
• When making a digital recording from an external equipment ("AUX-
DIGITAL")
You cannot make a digital recording from a digital-copied CD-R/RW on
an MD. "SCMS CANNOT COPY" appears on the display (see page 88).
To change the information shown on the display
On the remote control ONLY:
Press DISP/CHARA.
• Each time you press the button, the information on
the display changes as follows:
Source indication
SP
MD
REC
x 1
GROUP
Remaining recording time
SP
MD
REC
x 1
GROUP
MD track number
SP
MD
REC
x 1
GROUP
Clock indication
Ex.: When you record an FM broadcast.
* When group recording is not activated, "– –" will appear on the display.
MD group number*