JVC UX-J99DVD Instructions Manual page 45

(2)Press the character entry button
for a character you want to enter.
Ex.:
• To enter an "A" or "a," press
ABC once.
To enter a "B" or "b," press ABC
twice.
To enter a "C" or "c," press ABC three times.
• To enter a symbol, press MARK repeatedly until the mark
you want appears. For available symbols, see the right
column.
• To enter a numeral, press 0 – 9.
• To enter a space while entering a title, press ¢ twice.
• To move the character entry position while entering a title,
press ¢ or 4.
• If you have entered an incorrect character, press ¢ or
4 to select the character you want to correct, then press
CANCEL to delete it.
(3)Repeat steps 4 – (1) and 4 – (2) to enter other characters.
• If the character you want to enter next is assigned to the
same button you have just pressed in step
4 – (2), press ¢ once to move the character entry
position to the right.
5
Press ENTER.
"SEARCH • • •" flashes on the display. The unit
starts searching for the track.
MD
• When the track with the desired title is found, the unit plays
back the track. (After the track is played, the unit starts
searching for the next matching track.)
• If no track with the desired title is found, "NOT FOUND"
appears on the display and the Title Search is canceled.
TITLE SEARCH
To skip the current playback and search for the next track,
press ¢.
To cancel title searching, press TITLE SEARCH or 7.
When you press the button during playback or search, "SEARCH
END" appears and the TITLE SEARCH indicator goes off.
During MD Title Search
Repeat Play is canceled.
Available symbols are as follows:
(Blank)
To prohibit MD ejection—MD Lock
You can prohibit MD, disc, and cassette ejection from the unit,
and lock the MD.
See "Prohibiting Disc Ejection—Disc Lock" on page 23 for
details.
42