Louvre Installation; Logo Installation - Napoleon NZ-26 Installation And Operating Instructions Manual

26
6.3

LOUVRE INSTALLATION

For upper louvres:
A. Starting at the bottom of the louvre
panel align a louvre to the panel sides.
B. Slide the louvre into place behind the
tabs as shown.
C. Working upward, repeat until all 5
louvres are installed.
For lower louvre assembly:
A. Align hinges to the screw holes on the
back of the lower louvre assembly
B. Screw hinges into place securely.
6.4

LOGO INSTALLATION

A. Remove the backing on the adhesive.
B. Insert the two pins on the logo through the two
illustrated holes on the appliance.
C. Press fi rmly on the logo securing the
adhesive.
W415-0676 / C / 08.01.12
LOUVRE
PANEL
LOUVRE
TAB
LOGO
PLACEMENT