Tuner operations
Set the remote control mode
before operation.
• Select the desired band ("FM" or
Setting the AM tuner interval
spacing
Some countries space AM stations 9 kHz apart, and some
countries use 10 kHz spacing.
You can only change the AM tuner interval spacing while
selecting "AM" as the band.
• This operation is available when the System is turned off.
To Change the interval
spacing into 10 kHz
«Hold
(On the center unit)
Manual tuning
Tuning in to a station
"AM") you want to listen to.
(
12)
To Change the interval
spacing into 9 kHz
«Hold
(On the center unit)
You can also tune in to a station automatically. Press
and hold TUNING 9/TUNING ( until the station
search starts. The system automatically tunes in the
first-found station of sufficient signal strength.
You can also tune in to the station by pressing cursor
5/Y.
Preset tuning
You can preset 30 FM stations and 15 AM stations.
Storing the preset stations
1
Tune in to the station you want to preset.
2
"_ _" flashes on the display. Perform the next
step while "_ _" is flashing.
3
Select a preset number, then store the station to
that number.
Enter a preset number
• "STORED" appears on the display.
Tuning in to a preset station
Select a preset number.
You can also select a preset number
by pressing PRESET UP or PRESET DOWN.
*
For details on using the number buttons, see "How to use the
number buttons" (
Selecting the FM reception mode
When the stereo FM program currently tuned in is noisy, you
can change the FM reception mode to improve the reception.
Normally select this.
• When a stereo station is tuned in,
AUTO
the ST indicator lights on the
display.
Select to improve reception. (You
MONO
will lose the stereo effect.)
Store
*
*
11).
28