Husqvarna YTH 2454 Operator's Manual page 21

SERVICE AND ADJUSTMENTS
• Turn steering wheel to position wheels straight for-
ward.
• ATTACH FRONT LINK (E) - Work from left side of trac-
tor. Insert rod end of link assembly through front hole
in tractor front suspension bracket (F) and secure with
retainer spring (G) through hole in link located behind
the bracket.
• Insert other end of link (E) into hole in front mower bracket
(H) and secure with washer and retainer spring (J).
• Disengage belt tension rod (K) from locking bracket
(L).
F
G
L
K
C
E
H
FIG. 24
S
D
• Install belt onto engine clutch pulley (M).
IMPORTANT: Check belt for proper routing in all mower
J
pulley grooves.
•
Engage belt tension rod (K) on locking bracket (L).
CAUTION: Belt tension rod is spring
loaded. Have a tight grip on rod and
engage slowly.
• Raise attachment lift lever to highest position.
• If necessary, adjust gauge wheels before op er at ing
mower as shown in the Operation section of this
manual.
B
A
C
D
FIG. 26
20
M
FIG. 25
M
F
H
E