Table of Contents
Advertisement
4.
RAID configuration utility selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID configuration utility to use when you create
disk arrays. Place the jumper caps over pins 1–2 if you want to use the LSI MegaRAID
software RAID Setup Utility (default); otherwise, place the jumper caps to pins 2–3 to
use the Intel
5.
ME firmware force recovery setting (3-pin ME_RCVR1)
This jumper allows you to quickly recover the Intel Management Engine (ME) firmware
when it becomes corrupted.
4-6
®
Rapid Storage Technology Enterprise.
Chapter 4: Motherboard information
Advertisement
Table of Contents
