To install a PCI-E x8 (Gen3 x8 link), LP, HL card to the PCIE x16 slot:
1.
Place the butterfly riser card on a flat
and stable surface.
2.
Remove the screw (A) from the metal
cover then remove the metal cover (B).
3.
Install the expansion card to PCIE x16
slot.
4.
Secure the expansion card with a
screw.
Replacing the butterfly riser card bracket
To replace or install the butterfly riser card bracket:
1.
Align and place the butterfly riser card bracket into the chassis as shown.
Ensure that the screw holes on the riser card bracket matches the screw holes on the
chassis.
2.
Secure the riser card bracket with three screws as shown.
ASUS RS700-E8-RS4 Series
metal cover
PCIE x16 slot
2-19