Clock Setting; Preparations - JVC HR-A47U Instructions Manual

10
EN

Clock Setting

Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
1 8
2 – 7
1
4
7
1
1 8
SP EP
VCR
2 – 7
2 3
2
5 6
8 9
0
4
2 – 7
2 – 7
INITIAL SETTINGS (cont.)
Perform clock setting only if the clock has not been set
correctly by the Plug & Play setting or if you use a cable
box.
Access the Clock Set screen to perform the Semiauto or
Manual Clock Set. Each procedure starts from step 4
after preparation steps below are finished.
If you use a cable box, set the clock manually. (

Preparations

1
Access Main Menu screen
Press MENU.
2
Access Initial Set screen
On the front panel:
Press CH5∞ to move
the highlight bar (arrow)
to "INITIAL SET", then
press OK.
On the Remote:
Press SHUTTLE PLUS
5∞ to move the highlight bar (arrow) to "INITIAL
SET", then press OK or SHUTTLE PLUS 3.
3
Select clock set
On the front panel:
Press CH5∞ to move
the highlight bar (arrow)
to "CLOCK SET", then
press OK.
On the Remote:
Press SHUTTLE PLUS
5∞ to move the highlight bar (arrow) to "CLOCK
SET", then press OK or SHUTTLE PLUS 3.
pg. 12)
MAIN MENU
FUNCTION SET
TUNER SET
= INITIAL SET
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
INITIAL SET
= CLOCK SET
LANGUAGE ENGLISH
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END