Motorola SB5101 Reference Manual page 31

Table of Contents

Advertisement

10.1.1 Connecting to the Cable Modem via Diagnostic Console Cable:
The CLI can be accessed via the Diagnostic Console Cable and the DIAG port on the back of the
modem. This is typically done via "Windows HyperTerminal" with the following settings:
Bits per second:
Data bits:
Parity:
Stop bits:
Flow Control:
Diagnostic cables are supplied with the modems.
10.1.2 Connecting to the Cable Modem via Ethernet and an "rlogin" based Telnet Client:
Modem Ethernet IP address:
To access CLI from HFC side:
To access CLI from client CPE:
10.1.3 Logging Into the Cable Modem:
Login name:
target
Password:
first 15 digits of the unit serial number (It is best to copy these into a Notepad
Window first, then copy/paste to the Terminal Window you are using for access.)
10.1.4 Key Commands:
Displays modem addressing information (Ethernet MAC and IP)
Addressing
Displays ARP Storm filter statistics
arpstorm
Displays Baseline Privacy Key Management information
blpinfo
Changes modem boot parameters
bootChange
Displays state of bridge forwarding layer and statistics
bridge
clrcpemac
<xx-xx-xx-xx-xx>
Number of CPE's (Controlled by TFTP TLV Value MaxCPE)
Use to set modem configuration settings, such as starting frequency ranges,
config
known frequency and other registration/scanning parameters
Lists MAC addresses known by the modem including those provisioned and
cpemac
learned.
Sets the modem back to factory defaults
defaultcfg
Displays modem DHCP configuration information received from server
dhcpc
Downloads new software image from a specified server through TFTP
dlfile
Displays downstream diagnostic information, (frequency, SNR, FEC lock
dsdiag
status)
Displays event logs up to 173 entries, with wraparound buffer
eventlog
Exit the login session
exit | quit
Turns off CLI after next reboot
factSetCliOff
Lists available CLI commands
help | ?
Cancels reset action request
haltreset
MOTOROLA BCS
38400
8
None
1
None
192.168.100.1
rlogin <modem IP address from DHCP>
rlogin 192.168.100.1
Clear one static CPE MAC address from Table of known CPE's.
CONFIDENTIAL
SB5101 Cable Modem Overview
Page 31 of 34

Advertisement

Table of Contents
loading

Table of Contents