Tuning In To A Preset Station; Using An External Equipment; Listening To The External Equipment - JVC FS-G3 Instructions Manual

Tuning in to a Preset Station

On the remote control ONLY:
1
Press FM/AM to select either "FM"
or "AM."
The unit automatically turns on and tunes in to
the previously received station—either FM or AM.
• Each time you press the button, the band alternates
between FM and AM.
2
Press PRESET GROUP or
PRESET GROUP repeatedly
to select a preset number.

Using an External Equipment

Listening to the External Equipment

You can listen to the external equipment such as MD
recorder, cassette deck, or other auxiliary.
• First, make sure that the external equipment is properly
connected to the unit. (See page 7.)
1
Set the volume level to the minimum position.
2
Press AUX.
"AUX" appears on the display.
3
Start playing the external equipment.
4
Adjust the volume level to the level you want
to listen to.
To tune in to a preset station directly using the number
buttons
On the remote control ONLY:
FM/AM
Pressing the number button(s) allows you
to select the preset number you want.
Ex.: For preset number 5, press 5.
For preset number 15, press OVER,
then press 1, 5.
For preset number 20, press OVER,
then press 2, 0.
UP
PRESET
GROUP
DOWN
PRESET
GROUP
To exit AUX mode, select other source.
For operation of the external equipment
Refer to its instructions.
AUX
1 2 3
4 5 6
7 8 9
OVER
0
16