Makita DCS3500 Repair Manual page 11

03 CHAIN BRAKE / GUIDE BAR BOLT
6
Remove the handguard and
disengagement mechanism
Unscrew bolt 4 and pull out the sleeve 5.
Push handguard arm 6 from its position over
the hood towards the muffler.
Reparaturanleitung PS-4600 / PS-5000
Repair manual DCS3500 / DCS3501 / DCS4300 / DCS4301 / EA3500F / EA3501F / EA4300F / EA4301F / MEA3500L / MEA3500M / MEA4300G / MEA4300L
5
4
Remove the circlip 7.
Pull the disengagement mechanism up in
parallel with the axes.
Pull off the handguard with gentle back-and-
forth motion.
When reassembling always use a new
circlip 7 (927.304.000)!
Assemble the handguard and disengagement
mechanism, brake band and brake band
spring in reverse order.
7
Replacing the guide bar bolt
Screw two nuts onto the bar bolt and
counterlock them.
Unscrew the bar bolt.
Assembly: Apply Loctite 243 (980.009.000) to
the guide bar bolts and turn them all the way
in.
___
11