8.2.8. Manifold
1. Turn off the gas supply
2. Turn off the 120V power supply
3. Turn off the water supply
4. Loosen the PCB right-side screw from
bottom base
5. Pull out the PCB. (refer to 8.2.1 PCB)
6. Loosen the gas pipe from gas valve.(lower)
and Manifold.(upper)
< Figure 19 >
< Figure 20>
7. Pull out the gas pipe.
8. Loosen the 2 manifold fixing screws.
©Navien America Inc. 2010
9. Remove the wire harness from the 2
solenoids.
10. Pull out the manifold assembly.
11. Reinstall gas valve wires into the manifold
to be replaced.
12. Attach the manifold and secured with
screws.
143
NR/NP series service Manual
< Figure 21 >
< Figure 21 >
Version 2.0