Reset Mode And Navigation - Westinghouse WGR050NG076 Installation Instructions Manual

To enter Installer Mode, press and hold
twice to find History Mode. The control is ready to access the History Mode when the following screen appears on the display.
Press at this screen to access the History Mode codes (H01, H02, etc.).
Press to advance through the codes. Press
To view code value, press
Press at any History Mode code screens to return to the upper level menu.
Table 13 details the History Mode codes in sequential order.
CODE
H01
H02
H03
H04
H05
H06
H07
H08
Table 13 – History Mode Codes – NOTE: Temperature Readings Depend on Temperature Unit Selection

3. RESET MODE AND NAVIGATION

Reset Mode ( ) allows the installer to reset and clear water heater history. This is especially helpful after troubleshooting or repairs
have concluded.
To enter Installer Mode, press and hold
three times to find Reset Mode. The control is ready to access Reset Mode when the following screen appears on the display.
Press and hold at this screen for five seconds to reset the water heater history.
Press to return to History Mode. View History Mode to ensure history has been cleared.
Press at any History Mode code screens to return to the upper level menu.
for five seconds. When the (
to return to the previous code.
or once. The value will appear. Press
Second Most Recent Error or Fault Code
Fourth Most Recent Error or Fault Code
Seventh Most Recent Error or Fault Code
Eighth Most Recent Error or Fault Code
for five seconds. When the (
) screen appears, Installer Mode is active. Press
at this screen to return to the code screen.
DESCRIPTION
Most Recent Error or Fault Code
Third Most Recent Error or Fault Code
Fifth Most Recent Error or Fault Code
Sixth Most Recent Error or Fault Code
) screen appears, Installer Mode is active. Press
46
WHL-001 REV. 9.3.14