Philips S42SD-YD09 Service Manual page 13

4.1.3 FFC and TCP from Connector
• Dis-assembling of TCP:
1. Open the clamp carefully.
2. Pull the TCP out from its connector.
• Re-assembling of TCP:
1. Put the TCP into the connector carefully
2. Close the clamp completely, until you hear a "Click".
Mechanical Instructions
Figure 4-5 Dis-assembly of TCP
Figure 4-6 Re-assembly of TCP
Figure 4-7 Mis-assembly of TCP
Figure 4-8 Dis- and re-assembly of FFC
SDI PDP 2K6
Notes:
• Checking whether the foreign material is on the connector
inside before assembling of TCP.
• Be careful, do not damage the board by ESD during
handling of TCP.
G_16380_018.eps
190606
G_16380_019.eps
190606
4. EN 13
G_16380_016.eps
190606
G_16380_017.eps
190606