JVC LST0819-001A Instructions Manual page 120

Operation
Built-in Viewer (continued)
MPEG4 Viewer Settings (continued)
Title Bar
A
Camera ID
B
Position Title
C
Tracking Frame
D
Time
E
Format
Stream
A
Stream
B
HTTP Port
C
Multicast IP
Address
D
Multicast Port
For setting display items on the viewer screen.
For the MPEG4 Viewer, characters are displayed in the title bar of the window.
Select On to display [Camera ID]. (Up to 16 alphanumeric characters will be
displayed.)
[Camera ID] can be specified on the [Basic Settings2] or [Camera] page. (A Page 51)
Select On to display the title of the position that is being displayed.
When On is selected, the Intelligent Tracking status appears as Standby ,
Recording , or Completed on the screen. (A Page 69).
Select On to display the time.
Select the format for displaying time.
YYYY, MM, and DD denote year, month and day respectively, while HH, MM, and SS
denote hour, minute and second respectively. mm is equivalent to 1/100 seconds.
For specifying settings for receiving MPEG4 stream.
For selecting the protocol when the viewer acquires data from the camera.
When HTTP is selected, lost packets are recovered via resending. Camera may be
monitored using multiple viewers when Multicast is selected.
:
Memo
● When playing back via multicast, start multicast sending on the [Streaming] page
of the camera unit.
[Streaming Page] (A Page 82)
Note:
● When Built-in Viewer is launched with Multicast specified, a Windows firewall
warning may appear. In this case, select unblock and proceed.
● If block is selected, the Windows firewall will block the multicast stream and
playback of multicast by the viewer will fail.
You can change the HTTP port number.
The default port number setting is 80.
Specify the same value as the parameter that is set on the [Protocol] page of the
camera. (A Page 81)
You can change the multicast IP address.
The default address is 225.0.2.1.
You can change the multicast port number.
The default port number setting is 59152.
:
Memo
● This is enabled when Start is selected for the [JPEG Control] item on the
[Streaming] page.
● Specify the same value as the parameter that is set on the [Streaming] page of
the camera. (A Page 82)