Adjusting The Zoom Ring (The Screen Size); Adjusting The Focus Ring (Focus) - JVC DLA-HX2E Instructions Manual

D-ila projector
Hide thumbs Also See for DLA-HX2E:
Table of Contents

Advertisement

Basic Operations
Display using the direct buttons
The direct buttons enable direct switching and op-
eration without having to go through the menu.
Input mode can be selected
by pressing the [PC] button or
the [VIDEO] button.
Audio-Vol
Digital zoom x1.2
When the [DIGITAL ZOOM], [VOLUME], [V-KEY-
STONE] or [H-KEYSTONE] buttons are pressed,
the level bar of the function is displayed.
26
PC 1
PC 2
PC 3
Y/C
VIDEO
12
Vert.keystone
0
Horiz.Keystone
0
'Tele side'
3.
'Wide side'
'Near side'
4.
'Far side'
VIDEO
Screen display
To select a computer or other devices connected to [PC1],
[PC2] or [PC3]: Press [PC]
PC
PC
Remote
Projector:
control unit
Control panel
• Upon pressing the button, the input mode changes as follows.
[PC1]: Projects image from [PC1] input terminal on
[PC2]: Projects image from [PC2] input terminal on
PC1
PC2
PC3
[PC3]: Projects image from [PC3] input terminal on
Screen display
Notes
• Sound is formed from sound signals connected to the [AUDIO IN]
terminal.
• When no image is input to the selected input terminal, the mes-
sage "No Input" is displayed on the screen. (☞ page 53)
• When the [PC2] input terminal is used, "PC2(BNC)" must be se-
lected from the "Options" item in the main menu. (☞ page 39)
3.

Adjusting the Zoom Ring (the screen size)

To enlarge the screen size: Turn the zoom ring towards the
To reduce the screen size: Turn the zoom ring towards 'Tele
4.

Adjusting the Focus Ring (Focus)

To focus on nearer points: Turn the focus ring towards the
To focus on farther points: Turn the focus ring towards the
When "Line display" (☞ page 39) is set
to "5sec" : After changing an input , the
new selection will appear on the screen
for about 5 seconds.
the right hand side of the projector.
the right hand side of the projector
the right hand side of the projector.
When "Line display" (☞ page 39) is set
PC1
to "5sec": After changing an input, the
new selection will appear on the screen
for about 5 seconds.
'Wide side'
side'
'Near side'
'Far side'

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dla-hx2u

Table of Contents